French Seam: How to Sew One, Step by Step

Quick answer: Sew the fabric wrong sides together with a narrow seam, press it open, fold right sides together and sew again so the raw edges are enclosed. For a 5/8 in allowance, sew 1/4 in first and 3/8 in second.

Sewing gear on Amazon

Sponsored

As an Amazon Associate, Sewing Insider earns from qualifying purchases. See our affiliate disclosure.

Prices and availability were accurate when retrieved from Amazon and may change. Retrieved Nov 18, 2026.

A French seam in six steps

A French seam is two seams in one: the first hides nothing, the second wraps the cut edges inside the seam so the inside looks as neat as the outside. It suits light fabrics that fray and shows nowhere on the right side except a small seam line.

  1. Wrong sides together

    Place the layers wrong sides together, pin or clip along the edge.

  2. First seam, narrow

    Sew 1/4 in from the edge (or 1/8 in if your pattern's allowance is 3/8 in).

  3. Press it open

    Press the seam open, then trim the allowance close to the stitching if it frays.

  4. Fold, right sides together

    Fold along the seam line so the right sides face and the stitched edge is exactly on the fold. Press for a crisp fold.

  5. Second seam, wider

    Sew 3/8 in from the fold (1/4 in for a 3/8 in allowance). The raw edges are now enclosed.

  6. Press to one side

    Press the seam to one side, or topstitch it flat.

1 wrong sidesstitch, trim2 fold, press3 stitch 3/8 inraw edges enclosed
The two passes add up to the pattern's full seam allowance.

Which seam allowance to use

The two passes add up to the allowance on your pattern. Sewing Parts Online: how to sew a French seam, Grainline Studio: French seams on various seam allowances agree on the split, and the narrow seam has to be wide enough to hold the stitching and still be enclosed by the second.

Pattern allowanceFirst seam (wrong sides)Second seam (right sides)
3/8 in1/8 in1/4 in
5/8 in1/4 in3/8 in
1 in1/4 in3/4 in

3/8 in and 5/8 in: Sewing Parts Online. 1 in example: same page. Grainline Studio covers further widths. Date checked 2026-11-17.

If you want the second seam to sit on the outside of the garment instead, reverse the two passes: right sides first, then wrong sides. Test on a scrap so you can see which looks better on your fabric.

When to use a French seam and when not to

Good forNot ideal for
Sheer and lightweight woven fabrics that frayThick fabrics: the folded seam adds bulk
Pillowcases, scarves, unlined blousesCurved seams with a lot of curve (they are hard to fold flat)
Seams that show on the insideStretch knits: the narrow seam can snap

Our guidance from how the seam is built; neither source ranks fabrics.

The pillowcase project is a good first try because the seams are straight and short. The seam finishes comparison shows where a French seam fits against a serged or bound edge.

Common mistakes

If threads poke through the finished seam, the first seam was too wide, or the fabric was not trimmed close before the second pass. If the finished seam is wider than the allowance on your pattern, you used the wrong split: remember the two numbers must add up. A seam that twists usually was not pressed before the second fold.

Frequently asked questions

How do you do a French seam step by step?

Sew wrong sides together with a narrow seam, press it open, fold right sides together with the seam on the fold, and sew a slightly wider seam to enclose the raw edges.

When should you not use a French seam?

Avoid it on thick fabrics, tight curves and stretch knits, where the folded seam is bulky, hard to turn or can snap. It works best on straight seams in light fabric.

How do I hand sew a French seam?

The steps are the same: a small running or back stitch wrong sides together, press, fold and stitch again. Use a back stitch for strength.

What is the difference between a plain seam and a French seam?

A plain seam is one pass with the raw edges left inside, usually finished separately. A French seam is two passes that enclose the raw edges.

What we checked, and where

Show what we checked and the sources
What we stateSource and status
5/8 in allowance: 1/4 in then 3/8 in; 3/8 in allowance: 1/8 in then 1/4 in; 1 in example: 1/4 in then 3/4 inSewing Parts Online; Grainline Studio gives the same method for other widths.
Where a French seam suits and does notOur guidance; neither page ranks fabrics.

Date checked: November 17, 2026. A claim with one readable source is labelled single source; formulas are computed.

This article reflects independent editorial research and disclosed buying criteria, not hands-on testing. Sewing machines vary by model, so always check your machine's manual for exact setup, threading, and safety guidance. This is not professional repair, electrical, or safety advice. Some links on this page are Amazon Associates affiliate links; see our affiliate disclosure.