Tablecloth Size Calculator: Round, Square, Rectangle and Oval

Quick answer: Cloth size = table size + 2 × the drop (plus the hems). A 36 × 60 in table with an 8 in drop and a 2 in hem allowance is cut 56 × 80 in.

Tablecloth Size Calculator

Units
Casual 6 to 8 in, formal 10 to 16 in, to the floor about 30 in.
Fine-tune options (2)

hem allowance, usable width after selvedges

One tutorial uses 2 in (fold ½, then 1½); others use 1 in. Our default: change it to suit your hem.
Filled in from the bolt width. Type your own if you measured it.

Fractions work: type 2 1/4 or 2.25, or tap a fraction under the box.

Cut the cloth 56 in × 80 in

Buy 4⅝ yd (4.23 m). Needs one join. Put a full-width panel in the middle and sew half of the second panel to each side, so no seam runs down the centre.

The working
Cut size
56 in × 80 in
Finished size
52 in × 76 in
Panels
2 × 80 in

Cut size = table + 2 × (drop + hem). Round and oval cloths are cut from the full rectangle.

table56 in wide80 in

Sewing gear on Amazon

Sponsored

As an Amazon Associate, Sewing Insider earns from qualifying purchases. See our affiliate disclosure.

Prices and availability were accurate when retrieved from Amazon and may change. Retrieved Nov 17, 2026.

How it works

  1. Pick the shape and measure

    Measure the top, not the cloth you own. For a round table, measure the diameter.

  2. Choose the drop

    Casual 6 to 8 in, formal 10 to 16 in, and about 30 in to reach the floor.

  3. Choose the fabric width

    If the cloth is wider than the fabric, the calculator adds panels and places the seams.

Working out the cloth and the seams

The rule is the same for every shape: the table plus the drop on every side. For a round table that is the diameter plus twice the drop, and the cloth is cut from a square of that size. Oval and rectangular tables use both measurements. The hem allowance goes on top of the drop, on each edge.

Fabric rarely comes wide enough. Our rectangle example is 56 in wide and needs 2 panels of 54 in fabric (50 in usable). With two panels, put a full-width panel in the middle and sew half of the second panel to each side, so that no seam runs straight down the middle of the table. One tutorial we could open uses this layout (single source), so treat it as one good way to place the seams, not a rule; the layout drawing is only a guide.

The drop ranges come from three cloth-maker guides, which agree on casual drops and differ on formal ones. Measure from the table top to where you want the cloth to end, with a tape, before you cut.

Finished cloth size by table

Table8 in drop (casual)12 in drop (formal)30 in drop (floor)
Round 36 in52 in60 in96 in
Round 48 in64 in72 in108 in
Round 60 in76 in84 in120 in
Square 36 in52 × 52 in60 × 60 in96 × 96 in
Rectangle 36 × 60 in52 × 76 in60 × 84 in96 × 120 in
Rectangle 40 × 72 in56 × 88 in64 × 96 in100 × 132 in
Rectangle 40 × 96 in56 × 112 in64 × 120 in100 × 156 in

Finished sizes, before hems. Drops from Omni Calculator: tablecloth size, Sferra tablecloth size guide and Magic Linen: round tablecloth sizes.

Frequently asked questions

How big should a tablecloth be for a 60 inch round table?

With an 8 in drop, cut 76 in plus hems. For a cloth to the floor, with a 30 in drop, it is 120 in.

How much drop should a tablecloth have?

Three guides give 6 to 8 in for everyday cloths and 10 to 16 in for formal ones. A floor-length drop is about 30 in.

How do I join fabric for a wide tablecloth?

Keep one full-width panel in the middle and sew the other panels beside it. Press the seams open, and the cloth hangs flat.

Is the cloth size the same for an oval table?

Yes: width and length each get twice the drop. Cut a rectangle, then round the corners.

What we checked, and where

RuleSource and status
Cloth = table + 2 × dropOmni Calculator, Sferra and Magic Linen agree.
Drop: casual 6 to 8 in, formal 10 to 16 in, floor about 30 inThe formal range differs by page (10 to 16 in).
Hem allowance 2 in (½ in then 1½ in); centre panel with two side panelsSingle source (Sew4Home). Other guides use 1 in hems. Our default: change it in the fine-tune box.

Date checked: November 17, 2026. Formulas are labelled computed; a rule with one source is labelled single source.

These calculators give planning figures: check them against your pattern and your fabric. Some links on this page are Amazon affiliate links; see our affiliate disclosure.