Quilt Size Calculator and Quilt Size Chart

Quick answer: Quilt width = mattress width + 2 × the drop. Quilt length = mattress length + the drop + a pillow tuck. A queen mattress (60 × 80 in) with a 12 in drop and a 10 in tuck comes to about 84 × 102 in.

Quilt Size Calculator

Units
10 to 15 in is the usual range.
8 to 12 in. Type 0 for none.

Fractions work: type 2 1/4 or 2.25, or tap a fraction under the box.

Finished quilt: 84 in wide × 102 in long

The working
Width
60 in mattress + 2 × 12 in drop
Length
80 in mattress + 12 in drop + 10 in tuck

pillow tuck mattress drop 84 in 102 in

Sewing gear on Amazon

Sponsored

As an Amazon Associate, Sewing Insider earns from qualifying purchases. See our affiliate disclosure.

Prices and availability were accurate when retrieved from Amazon and may change. Retrieved Nov 17, 2026.

How it works

  1. Pick the bed

    Choose a mattress size, or type your own measurements if the bed is thicker or an odd size.

  2. Set the drop

    The drop is how far the quilt hangs down the sides and foot. Short drops sit just below the mattress edge; full drops reach the floor.

  3. Add the pillow tuck

    Extra length at the head lets the quilt fold over the pillows. Type 0 for a quilt that stops at the pillows.

How the quilt size is worked out

Quilt sizes are conventions, not standards. Two pattern companies can both sell a "queen" quilt that differs by ten inches, because one allows a short drop and the other drops to the floor. That is why this calculator starts from your bed instead of a size name, and why the chart below shows ranges.

The sums are the same ones quilt shops use: add the drop once on each long side, add it once more at the foot, and add the tuck at the head. A mattress that is deeper than usual needs a bigger drop to hang the same way, so measure from the top of the mattress down to where you want the quilt to end.

Finished size means after binding. Cotton also shrinks a little in the first wash, so if you need an exact size, build in an extra two to three inches.

Quilt size chart: finished sizes by bed

SizeMattressComputed (12 in drop, 10 in tuck)Common finished sizes
Baby / crib28 × 52 in52 × 74 in36–40 × 45–60 in
Throw / lap––50–60 × 65–72 in
Twin38 × 75 in62 × 97 in60–70 × 80–90 in
Full54 × 75 in78 × 97 in76–84 × 87–96 in
Queen60 × 80 in84 × 102 in90 × 95–108 in
King76 × 80 in100 × 102 in108–110 × 95–110 in
California king72 × 84 in96 × 106 in102 × 100 in single source

Ranges from Missouri Star quilt sizes chart and Linda's Electric Quilters size guide. Conventions, not standards: patterns differ. Computed column is our formula.

Frequently asked questions

How big should a queen quilt be?

Pattern sizes for a queen run from about 90 × 95 in to 90 × 108 in. For your own bed, use 60 × 80 in plus twice your drop on the width and the drop plus a pillow tuck on the length.

What is a pillow tuck?

It is the extra length at the head of the bed that folds under or over the pillows. Sources suggest 8 to 12 in.

Does the quilt size include the binding?

Yes. The ranges here are finished sizes, so they already count the binding.

What we checked, and where

RuleSource and status
Mattress sizesTwo mattress makers; full is 54 in on one page and 53 in on the other.
Drop 10 to 15 in, pillow tuck 8 to 12 inTwo quilting references; they give slightly different ranges, so the tool shows the widest.
Quilt size rangesTwo quilting references. California king is a single source.

Date checked: November 17, 2026. Formulas are labelled computed; a rule with one source is labelled single source.

These calculators give planning figures: check them against your pattern and your fabric. Some links on this page are Amazon affiliate links; see our affiliate disclosure.