How it works
Enter the finished size
That is the size the unit will be in the finished quilt, seam allowances not included.
Pick a method
Two at a time is exact. Four and eight at a time make more units from each pair of squares, but you cut oversize and trim.
Sew and trim
Sew ¼ in either side of the drawn diagonal, cut on the line, press, and trim each unit to the unfinished size.
Where the ⅞ in comes from
A half-square triangle is a square split on the diagonal into two colours. The seam allowances add ½ in to the finished size, and the diagonal seam adds a little more because the cut edge lands on a corner. Working it through gives ⅞ in extra for the two-at-a-time method, a rule two quilting references state outright.
The four and eight at a time methods make several units from one pair of squares, but they are less standardised. We found that pages disagree on the right size, so the tool gives a generous cut and every unit should be trimmed. Make one test block before you cut your whole stack.
The flying geese tab uses the no-waste method: one large square plus four small squares make four units in a 2 : 1 shape. The large square is the finished width plus 1¼ in and the small squares are the finished height plus ⅞ in.
Half-square triangle cutting chart
| Finished size | Trim to | Cut: 2 at a time | Cut: 4 at a time | Cut: 8 at a time |
|---|---|---|---|---|
| 1 in | 1½ in | 1⅞ in | 2¼ in | 4 in |
| 1½ in | 2 in | 2⅜ in | 2¾ in | 5 in |
| 2 in | 2½ in | 2⅞ in | 3¼ in | 6 in |
| 2½ in | 3 in | 3⅜ in | 3¾ in | 7 in |
| 3 in | 3½ in | 3⅞ in | 4¼ in | 8 in |
| 3½ in | 4 in | 4⅜ in | 4¾ in | 9 in |
| 4 in | 4½ in | 4⅞ in | 5¼ in | 10 in |
| 5 in | 5½ in | 5⅞ in | 6¼ in | 12 in |
| 6 in | 6½ in | 6⅞ in | 7¼ in | 14 in |
Computed. Two at a time: Omni Calculator: half-square triangle, National Quilters Circle: quilt math. Four and eight at a time are single-source (Patchwork Posse: four HSTs at a time, Patchwork Posse: eight HSTs at once) and cut oversize, so trim.









