Circle Skirt Calculator: Full, ¾, Half and Quarter

Quick answer: Radius = waist ÷ (2 × π × the fraction of a circle). A 28 in waist full circle has a waist radius of 4.5 in. Cut 4 in from the centre for the waist hole, then add the skirt length and hem.

Circle Skirt Calculator

Units
Fine-tune options (3)

seam allowance at the waist, hem allowance, usable width after selvedges

Sources use 0.5 in or 0.8 in (2 cm). Type your own.
One source uses 0.8 in (2 cm). Type your own.
Filled in from the bolt width. Type your own if you measured it.

Fractions work: type 2 1/4 or 2.25, or tap a fraction under the box.

Buy 3⅛ yd (2.86 m)

Needs a seam: cut two pieces and sew them together down the centre back.

The working
Waist hole radius (cut)
4 in
Outer radius (cut, with hem)
27¼ in
Fabric width needed
54½ in
Fabric length
109 in

Waist radius = waist ÷ (2 × π × 1). Cut one seam allowance inside the waist line.

waist outer radius 27¼ in

Sewing gear on Amazon

Sponsored

As an Amazon Associate, Sewing Insider earns from qualifying purchases. See our affiliate disclosure.

Prices and availability were accurate when retrieved from Amazon and may change. Retrieved Nov 17, 2026.

How it works

  1. Measure the waist and the length

    Waist is your own measurement. Length runs from the waist to where the hem will fall.

  2. Pick the circle

    A full circle swirls most and uses the most fabric. A quarter circle hangs closer to the body.

  3. Mark and cut

    Fold the fabric, mark the two radii from the corner or centre with a string or tape, and cut.

Where the radius comes from

The waist edge of a circle skirt is an arc, and the arc has to be as long as your waist. For a full circle the arc is the whole circumference, 2 × π × r, so r = waist ÷ 6.28. A half circle has half the arc for the same radius, so its radius is twice as big. The calculator does the same with ¾ and ¼.

The waist hole is cut one seam allowance smaller than that radius, because the seam allowance lies inside the finished waist line. The outer radius is the waist radius plus the length plus the hem. The seam and hem defaults come from published circle skirt guides that disagree slightly (0.5 to 0.8 in), so both boxes can be changed.

Fabric width decides whether the skirt needs a seam. A 28 in waist, 22 in long full circle is 54.5 in across, wider than 44 in fabric, so it is cut in two pieces with a seam at the centre back. The same waist as a quarter circle fits in a single piece on 60 in fabric and takes 1¼ yd. Hang the skirt for a day before hemming, because the bias edges drop.

Waist radius by waist size

WaistFull circle¾ circleHalf circleQuarter circle
24 in3.8 in5.1 in7.6 in15.3 in
26 in4.1 in5.5 in8.3 in16.6 in
28 in4.5 in5.9 in8.9 in17.8 in
30 in4.8 in6.4 in9.5 in19.1 in
32 in5.1 in6.8 in10.2 in20.4 in
34 in5.4 in7.2 in10.8 in21.6 in
36 in5.7 in7.6 in11.5 in22.9 in
40 in6.4 in8.5 in12.7 in25.5 in

Computed: waist ÷ (2 × π × fraction). Subtract the seam allowance for the waist hole; add length and hem for the outer radius.

Frequently asked questions

How do I calculate the radius for a circle skirt?

Divide the waist by 2 × π × the fraction of a circle (1, ¾, ½ or ¼), then subtract the seam allowance for the waist hole.

How much fabric do I need for a full circle skirt?

It needs fabric as wide as the outer diameter, or two pieces with a seam. A 28 in waist and 22 in length takes about 1⅝ yd of 60 in fabric, or 3⅛ yd of 44 in with a seam.

Why does my circle skirt hem look uneven?

The edge is cut on the bias in places, so it stretches. Let the skirt hang for 24 hours, then trim the hem level before turning it up.

What is the difference between a half and a full circle skirt?

A half circle uses half the fabric and has half the sweep. Its waist radius is twice that of a full circle for the same waist.

What we checked, and where

RuleSource and status
Radius = waist ÷ (2 × π × fraction), minus the waist seam allowanceOmni Calculator, Creative Curator and Minerva agree.
Waist seam 0.5 in or 0.8 inTwo pages, two figures: change the box to your own.
Hem 0.8 inSingle source (Omni). Fabric widths: no source; type your own.

Date checked: November 17, 2026. Formulas are labelled computed; a rule with one source is labelled single source.

These calculators give planning figures: check them against your pattern and your fabric. Some links on this page are Amazon affiliate links; see our affiliate disclosure.