Seam allowance by use

Seam allowance chart
UseSeam allowanceNote
US commercial patterns5/8 in (1.6 cm)North American standard for Simplicity, McCall's, Butterick and Vogue-type patterns.
Quilting1/4 in (0.6 cm)Often sewn scant so the finished seam measures true.
Home decor and curtains3/4 to 1 in (1.9 cm)Wider than typical garment seams.
Serger / overlock (stitch position)1/4 in (0.6 cm)The stitches sit about 1/4 in from the fabric edge to the left needle. On light fabric the knife trims about 1/8 in of the seam allowance; on medium and heavy fabric, serge without extra trimming. Set by the machine, so follow your pattern's allowance and test on scrap.
French seam5/8 in (1.6 cm)Two passes: 1/4 then 3/8 in (or 3/8 then 1/4); trim between.
Curved seams and necklines1/4 to 3/8 in (0.6 cm)Narrower than straight seams; clip or notch curves.
Hems: skirts, dresses, coats1 1/2 to 3 in (3.8 cm)NMSU says 2 to 3 in; BellaOnline says 1 1/2 to 2 in for most skirts and dresses.
Hems: jackets, pants, blouses1 to 2 in (2.5 cm)NMSU Extension only; BellaOnline gives no figure for these.
Hems: flared or circular edges1/2 to 1 in (1.3 cm)Narrower on curves so the hem lies flat.
Zipper insertion5/8 in (1.6 cm)Add 5/8 in to zipper length when marking the opening.

Last checked November 17, 2026.

Metric equivalents are computed from the first figure.

Seam allowance guide: use it for your own measurements.

What we checked, and where

Last checked November 17, 2026. Values marked computed come from a formula; a row with one source is labelled single source.