Button Size Chart: Ligne, Millimetres and Inches

Quick answer: 1 ligne = 0.635 mm, so 40 ligne is 1 inch. A 20 ligne button is 12.7 mm (½ in). Make the buttonhole about the button's diameter plus its thickness, and test on scrap.

Sewing gear on Amazon

Sponsored

As an Amazon Associate, Sewing Insider earns from qualifying purchases. See our affiliate disclosure.

Prices and availability were accurate when retrieved from Amazon and may change. Retrieved Nov 17, 2026.

Button size chart: ligne to mm and inches

Button sizes on cards and in catalogues are often in ligne, a unit used for buttons and nothing else. The conversion is a definition, so the millimetres and inches below are computed, not measured. The uses come from one retailer's chart.

LigneMillimetresInchesTypical use
14 ligne8.9 mm0.35 in (about ⅜ in)Button-down and collar single source
16 ligne10.2 mm0.4 in (about ⅜ in)Sleeve single source
18 ligne11.4 mm0.45 in (about ½ in)Shirt front single source
20 ligne12.7 mm0.5 in (about ½ in)Sport shirt single source
22 ligne14 mm0.55 in (about ½ in)Sport shirt single source
24 ligne15.2 mm0.6 in (about ⅝ in)Sleeve and pant single source
27 ligne17.1 mm0.68 in (about ⅝ in)Pant single source
30 ligne19.1 mm0.75 in (about ¾ in)Suit single source
32 ligne20.3 mm0.8 in (about ¾ in)Suit single source
34 ligne21.6 mm0.85 in (about ⅞ in)Suit single source
36 ligne22.9 mm0.9 in (about ⅞ in)Suit single source
40 ligne25.4 mm1 in (about 1 in)Overcoat single source
44 ligne27.9 mm1.1 in (about 1⅛ in)Overcoat single source

Computed: 1 ligne = 0.635 mm. Uses: Wawak button size chart (single source). Date checked: November 17, 2026.

14 ligne8.9 mm20 ligne12.7 mm30 ligne19.1 mm40 ligne25.4 mm
Four sizes, drawn in proportion.

How long to make the buttonhole

There is no single rule. The simple one adds the button's thickness to its diameter, and the table uses ⅛ in thick as the example. A thicker button needs a longer hole.

  1. Measure the button

    Measure across the widest part with a ruler or calipers, and note how thick it is.

  2. Work out the length

    Add the thickness to the diameter. For a domed or thick button, wrap tape round it, halve that and add ⅛ in.

  3. Test on a scrap

    Sew one buttonhole on a scrap of the same fabric with the same interfacing, and cut it open. The button should pass through with a little resistance.

Button widthButtonhole (width + ⅛ in thick)
½ in (12.7 mm, 20 ligne)⅝ in
⅝ in (15.9 mm, 25 ligne)¾ in
¾ in (19.1 mm, 30 ligne)⅞ in
⅞ in (22.2 mm, 35 ligne)1 in
1 in (25.4 mm, 40 ligne)1⅛ in
1¼ in (31.8 mm, 50 ligne)1⅜ in

Rule from Sewing.org: buttonholes; the tape method is from NMSU Extension: machine buttonholes made easy. We label this an estimate: always test.

Frequently asked questions

What is a ligne?

A ligne (L) is a button size unit: 1 ligne is 1/40 inch, which is 0.635 mm. A 40 ligne button is 1 inch across.

How do I convert ligne to mm?

Multiply by 0.635. A 24 ligne button is 24 × 0.635 = 15.2 mm.

How long should a buttonhole be?

Sewing.org gives the button's diameter plus its thickness. NMSU Extension has you wrap a tape around the widest part, halve it and add ⅛ in. Both say to test on a scrap of your fabric.

What size button goes on a shirt?

One retailer chart lists 14 ligne for collars, 16 for sleeves and 18 for shirt fronts. Treat it as a guide: check your pattern's envelope.

What we checked, and where

RuleSource and status
1 ligne = 0.635 mm (40 ligne = 1 in)Computed; stated on the Wawak chart.
Typical uses by ligneSingle source (Wawak).
Buttonhole lengthTwo sources, two methods: estimate, test on scrap.

Date checked: November 17, 2026. Formulas are labelled computed; a rule with one source is labelled single source.